Show Filter

What Would You Like To Learn?

LX480 Dual-Engine Reverb taxonomy filter (Radio)

LX480 Dual-Engine Reverb

Articles

Setup
Tempo Sync The Tempo Sync checkboxes are used to base the associated sliders' time on a sub-division of the host DAW's session tempo. The range for each of these sliders is between 1/64 triplet and...
Setup
This is the default mode. Only one engine is active at any time and acts on the stereo input. To choose which engine is active, use the E1 and E2 buttons.
Setup
This chains the two engines in series. It passes the output of Engine 1 into Engine 2.
Setup
The left input signal is processed by Engine 1 and the right by Engine 2. The resulting signals are then summed at the output. This is useful when creating a unique and sometimes unnaturally wide s...
Setup
This routing passes the stereo signal to both engines and combines the output from both. This capability adds a massive amount of flexibility to the LX480.
Setup
Range On/Off Description This is an emulation of the original 18-bit digital I/O
Setup
Range On/Off Description This is an emulation of the original main analog outputs
Setup
Range On/Off Description This is an emulation of the original secondary analog outputs
Setup
Range On/Off Description Switches between the original hardware bit-depth of 18-bit into 32-bit float. When the 18-bit mode is turned off, it doesn’t get truncated like on the hardware. Although th...
Setup
Range On/Off Description Turns on or off a hard-clipping saturation. This saturation occurs due to the integer precision of the original hardware, producing distortion inside the algorithm. This re...
Setup
Range On/Off Description Turns on or off a bug found in the RHall algorithm of the original hardware. This bug is exhibited when Spin (SPN) and Wander (WAN) are set to zero and the size changes, re...
Setup
Range On/Off Description Switches between the bit-depth of the modulation section of the algorithm and 32-bit float. The original hardware’s modulation section was only 8-bit, therefore when the mo...
Panorama
Range 0-254
Panorama
Range 0-97 degrees
Panorama
Range 0-254
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the delay line DL1.
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the delay line DL2.
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the delay line DL3.
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the delay line DL4.
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the early reflection delay line DL1 (L input channel, L output channel).
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the early reflection delay line DL2 (L input channel, R output channel).
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the early reflection delay line DL3 (L input channel, L output channel)
Early Reflection Delay Level (ERLV)
Range Off to 0dB Description This sets the level for the early reflection delay line DL4 (R input channel, R output channel).
SHOW MORE