Show Filter

What Would You Like To Learn?

LX480 Dual-Engine Reverb

Articles

Shape and Spread (SHAPE)
Dry delay – IND
Range 0ms to 1500ms Description This parameter sets the amount of delay applied to the dry signal that is mixed in by the Wet/Dry Mix (MIX) control. Usually, this will be set to 0, but it can be in...
KNOW MORE
Shape and Spread (SHAPE)
Ambience Size – AMS (SIZ on Original)
Range 1m to 40m Description This parameter varies the apparent size of the ambient space. Setting this parameter in an appropriate range is often a good first step to achieving the desired space, o...
KNOW MORE
Shape and Spread (SHAPE)
Left Channel Dry Level – DLL (DRY on Original)
Range Off to 0dB Description This parameter sets the amount of dry signal that passes through unaffected from the left input to the left output.
KNOW MORE
Shape and Spread (SHAPE)
Right Channel Dry Level – DLR (DRY on Original)
Range Off to 0dB Description This parameter sets the amount of dry signal that passes through unaffected from the right input to the right output.
KNOW MORE
Shape and Spread (SHAPE)
Left Channel Pan – PNL (PAN on Original)
Range: Left to Right Description: This parameter sets the panning of the left DL1/DL3 (and FB1/FB4) channel between left and right, before the final filter stage.
KNOW MORE
Shape and Spread (SHAPE)
Right Channel Pan – PNR (PAN on Original)
Range: Left to Right Description: Specific to the Twin Delays algorithm, this parameter sets the panning of the right DL2/DL4 (and FB2/FB3) channel between right and left, before the final filter s...
KNOW MORE
Shape and Spread (SHAPE)
Shape – SHP
Range: 0 to 255 Description: The two parameters Shape and Spread work together to control the contour of the initial envelope of the reverberation sound. Shape controls the actual amplitude contour...
KNOW MORE
Shape and Spread (SHAPE)
Spread – SPR
Range: 0 to 255 Description: The Spread parameter controls the time stretch of the initial decay phase. It works in combination with the Shape and Decay Optimization parameters to form the overall ...
KNOW MORE
Shape and Spread (SHAPE)
Size – SIZ
Range: 1m to 39m (depending on the algorithm) Description: Sets the apparent size (roughly equal to the longest dimension in meters) and how fast the diffusion builds up. It also affects the Reverb...
KNOW MORE
Shape and Spread (SHAPE)
Pre-delay – PDL
Range: 0ms to 1500ms Description: Adjust the time delay between the reverberation and the input signal. Contrary to popular beliefs, it’s not recommended to use the Pre-delay parameter for emulatin...
KNOW MORE
Shape and Spread (SHAPE)
Width – WID
Range: –360 to 360 Description: Controls the width of both the reverberation and pre-echoes. The parameter is able to perform phase inversion, Left/Right inversion (channel swapping) and surround–c...
KNOW MORE
SHOW MORE

STAY CONNECTED

SUBSCRIBE FOR OUR NEWSLETTER

Get the latest Relab news, product info, and great deals and personal service.

Facebook-f Youtube Soundcloud

Don't worry, we're not going to send you spam. Only the most necessary and important news awaits you.

© Relab 2024. All rights reserved