Show Filter

What Would You Like To Learn?

LX480 Dual-Engine Reverb

Articles

Time (TIME)
Range: 0 to 127 Description: The Ambience algorithm parameter controls the level of the reverberant part of the decay. This parameter is unique to the Ambience algorithm. You can almost think of th...
Time (TIME)
Range: 0.50x to 2.00x Description: Specific to the Twin Delays algorithm, this parameter is a master multiplier that allows you to adjust the delay times for all four delay lines (DL1, DL2, DL3 and...
Time (TIME)
Range: 120Hz to Full Description: Specific to the Twin Delays algorithm, this parameter controls the roll-off frequency for the low pass filter on delay line 1 (left channel). Note: This is a conti...
Time (TIME)
Range: Cut to 0db Description: Specific to the Twin Delays algorithm, this parameter controls the amount of reduction above the roll-off frequency (ROL) for the low pass filter on delay line 1 (lef...
Time (TIME)
Range: 120Hz to Full Description: Specific to the Twin Delays algorithm, this parameter controls the roll-off frequency for the low pass filter on delay line 2 (right channel). Note: This is a cont...
Time (TIME)
Range: Cut to 0db Description: Specific to the Twin Delays algorithm, this parameter controls the amount of reduction above the roll-off frequency (ROR) for the low pass filter on delay line 2 (rig...
Time (TIME)
Range: 493Hz to 21.18Hz Description: Sets the frequency where the transition between mid frequency and high frequency takes place. The parameter (in combination with High Multiply (HIG)) simulates ...
Time (TIME)
Range: 120Hz to Full Description: Controls the decay time for frequencies above the High Crossover (HXO) frequency in relation to Reverb Time Mid (RTM). The High Multiply parameter is a multiplier ...
Time (TIME)
Range: 120Hz to Full Description: Sets the frequency where the transition between low frequency and mid frequency takes place. Typical values for real halls are below 400Hz. This is a continuous pa...
Time (TIME)
Range: 0.2x to 4.0x Description: Controls the decay time for frequencies below the Bass Crossover (BXO) frequency in relation to Reverb Time Mid (RTM). The Bass Multiply parameter is a multiplier o...
Time (TIME)
Range: 0s to 66s (depending on the parameter Size (SIZ)) Description: Sets the decay time of the reverberation algorithm at mid frequencies. Reverb Time Mid acts as a master control for the reverb...
SHOW MORE