Show Filter

LX480 Dual-Engine Reverb

Articles

Home » LX480 Dual-Engine Reverb » The Parameters » Page 2

LX480 Dual-Engine Reverb

Range Off to 0dB Description This sets the level for the early reflection delay line DL5 (R input channel, L output channel).

KNOW MORE

LX480 Dual-Engine Reverb

Echo Level 6 R > R – LV6

Range Off to 0dB Description This sets the level for the early reflection delay line DL6 (R input channel, R output channel).

KNOW MORE

Early Reflection Delay Time (ERTM)

Left Delay 1 Value – DL1

Range 0ms to 1491ms Description This sets the delay time for the delay line DL1.

KNOW MORE

Early Reflection Delay Time (ERTM)

Right Delay 2 Value – DL2

Range 0ms to 1491ms Description This sets the delay time for the delay line DL2.

KNOW MORE

Early Reflection Delay Time (ERTM)

Left Delay 3 Value – DL3

Range 0ms to 1491ms Description This sets the delay time for the delay line DL3.

KNOW MORE

Early Reflection Delay Time (ERTM)

Right Delay 4 Value – DL4

Range 0ms to 1491ms Description This sets the delay time for the delay line DL4.

KNOW MORE

Early Reflection Delay Level (ERLV)

Echo Delay 1 L > L – DL1

Range 0ms to 2500ms Description This sets the delay time for the early reflection delay line DL1 (L input channel, L output channel).

KNOW MORE

Early Reflection Delay Time (ERTM)

Echo Delay 2 L > R – DL2

Range 0ms to 2500ms Description This sets the delay time for the early reflection delay line DL2 (L input channel, R output channel).

KNOW MORE

Early Reflection Delay Time (ERTM)

Echo Delay 3 L > L – DL3

Range 0ms to 2500ms Description This sets the delay time for the early reflection delay line DL3 (L input channel, L output channel)

KNOW MORE

Early Reflection Delay Time (ERTM)

Echo Delay 4 R > R – DL4

Range 0ms to 2500ms Description This sets the delay time for the early reflection delay line DL4 (R input channel, R output channel)

KNOW MORE

Early Reflection Delay Time (ERTM)

Echo Delay 5 R > L – DL5

Range 0ms to 2500ms Description This sets the delay time for the early reflection delay line DL5 (R input channel, L output channel).

KNOW MORE

Early Reflection Delay Time (ERTM)

Echo Delay 6 R > R – DL6

Range 0ms to 2500ms Description This sets the delay time for the early reflection delay line DL6 (R input channel, R output channel).

KNOW MORE

Density (DEN)

Left Delay 1 FeedBack – FB1

Range –100 to 100% Description This parameter sets the feedback, either positive or negative (phase inverted), of the left delay DL1.

KNOW MORE

Density (DEN)

Right Delay 2 FeedBack – FB2

Range –100 to 100% Description This parameter sets the feedback, either positive or negative (phase inverted), of the right delay DL2

KNOW MORE

Density (DEN)

L–R Delay 3 FeedBack – FB3

Range –100 to 100% Description This parameter sets the cross–panned feedback, either positive or negative (phase inverted), from the left delay DL3 into the right delay DL2.

KNOW MORE

Density (DEN)

R–L Delay 4 FeedBack – FB4

Range –100 to 100% Description This parameter sets the cross–panned feedback, either positive or negative (phase inverted), from the right delay DL4 into the left delay DL1.

KNOW MORE

Density (DEN)

ER/Reverb Mix – ERM

Range 64:0 to 0:64 Description Specific to the Random Hall HD algorithm, this parameter controls the ratio between reverberation signal and early reflection signal in the output. 64:0 represents on...

KNOW MORE

Density (DEN)

Reverb Mode – MOD

Range RVB or EFX Description Specific to the Random Hall and Random Hall HD algorithms, this parameter switches between RVB Mode and EFX Mode. The RVB Mode has linked operation for Reverb Time Mid ...

KNOW MORE

Density (DEN)

Decay Optimization – DCO

Range 0 RVB to 9 RVB, 0 EFX to 9 EFX Description This parameter changes the way the algorithm responds to different input levels, which affects how realistic the reverberation sounds. This paramete...

KNOW MORE

Density (DEN)

Decay Optimization Channel – DCC

Range LEFT or RIGHT Description Controls which channel receives the decay optimization specified by the DCO parameter. In rare circumstances (less than 5% of all power up) the original hardware swa...

KNOW MORE

Density (DEN)

Diffusion – DIF

Range 0 to 100% Description This parameter affects both reverberation and early reflections. Diffusion determines the amount of sound reflections within the onset of a reverb and is most noticeable...

KNOW MORE

Density (DEN)

Reverb Level – LEV

Range 0 to 254 Description Controls the input gain of the reverberation engine. Settings above 160 will result in saturation of the internal calculations. This parameter affects both reverberation ...

KNOW MORE

Density (DEN)

Mix – MIX

Range 0% to 100% Description Sets the ratio between the dry signal and the processed signal. 0% represents only dry signal and 100% represents only processed (wet) signal. When using LX480 on a sen...

KNOW MORE

Modulation (MOD)

Left Fine Delay – FNL (FIN on Original)

Range 0 to 49 samples Description This parameter controls an extra, sample–level delay for the left DL1/DL3 (and FB1/FB4) channel.

KNOW MORE

Modulation (MOD)

Right Fine Delay – FNR (FIN on Original)

Range 0 to 49 samples Description This parameter controls an extra, sample–level delay for the right DL2/DL4 (and FB2/FB3) channel.

KNOW MORE