Show Filter

What Would You Like To Learn?

LX480 Dual-Engine Reverb taxonomy filter (Radio)

LX480 Dual-Engine Reverb

Articles

LX480 Dual-Engine Reverb
Spin – SPN
Range 0 to 48 Description This setting controls how randomly the reverberation engine works. This makes the sound more natural, by changing the many delay taps in the algorithm. The modulation engi...
KNOW MORE
Modulation (MOD)
Wander – WAN
Range 0 to 25ms Description Wander determines how long the delay taps in the algorithms will move and it's dependent on the Size parameter. For large environments, a setting of around 10ms is recom...
KNOW MORE
Modulation (MOD)
Chorus Depth – CHD
Range 0 to 64 Description Controls the amount of the chorusing effect on the reverberation. Because this parameter (together with CHT and CHR) introduces pitch variations, sound sources with very l...
KNOW MORE
Modulation (MOD)
Chorus Rate – CHR
Range 0 to 48 Description Controls the rate of the chorusing modulation. Note This parameter is not available on the original hardware. Set the value to 0 for true emulation.
KNOW MORE
Modulation (MOD)
Chorus Type – CHT
Range –7 to 7 Description Selects between the various different chorusing modes. With a value of 0 the chorusing modulation is completely off. Settings 1–3 increase the number of internal delay lin...
KNOW MORE
Filters (FILTER)
Low Frequency – LFC
Range 120Hz to Full Description Sets the frequency below which a high–pass filter attenuates both the reverberation and the early reflections. The overall high–pass filtering is actually a combinat...
KNOW MORE
Filters (FILTER)
Low Shelf – LOS
Range Cut to 0db Description Modifies the high–pass filter characteristic of Low Frequency (LOF) into a shelving filter. Setting the value to the minimum of Cut will modify the shelving filter into...
KNOW MORE
Filters (FILTER)
High Frequency – HFC
Range 120Hz to Full Description Sets the frequency above which a low–pass filter attenuates both the reverberation and the early reflections. The overall low–pass filtering is actually a combinatio...
KNOW MORE
Filters (FILTER)
High Shelf – HIS
Range Cut to 0db Description Modifies the low–pass filter characteristic of High Frequency (HFC) into a shelving filter. A value of 0dB will deactivate the filter. Note This parameter is not availa...
KNOW MORE
Filters (FILTER)
Output Filter Type – OFT
Range 6dB or 12dB Description Controls the steepness of the two output filters. Switch between 6dB per octave and 12dB per octave. This parameter is not available on the original hardware. Set the ...
KNOW MORE
Shape and Spread (SHAPE)
Dry delay – IND
Range 0ms to 1500ms Description This parameter sets the amount of delay applied to the dry signal that is mixed in by the Wet/Dry Mix (MIX) control. Usually, this will be set to 0, but it can be in...
KNOW MORE
Shape and Spread (SHAPE)
Ambience Size – AMS (SIZ on Original)
Range 1m to 40m Description This parameter varies the apparent size of the ambient space. Setting this parameter in an appropriate range is often a good first step to achieving the desired space, o...
KNOW MORE
Shape and Spread (SHAPE)
Left Channel Dry Level – DLL (DRY on Original)
Range Off to 0dB Description This parameter sets the amount of dry signal that passes through unaffected from the left input to the left output.
KNOW MORE
Shape and Spread (SHAPE)
Right Channel Dry Level – DLR (DRY on Original)
Range Off to 0dB Description This parameter sets the amount of dry signal that passes through unaffected from the right input to the right output.
KNOW MORE
Shape and Spread (SHAPE)
Left Channel Pan – PNL (PAN on Original)
Range: Left to Right Description: This parameter sets the panning of the left DL1/DL3 (and FB1/FB4) channel between left and right, before the final filter stage.
KNOW MORE
Shape and Spread (SHAPE)
Right Channel Pan – PNR (PAN on Original)
Range: Left to Right Description: Specific to the Twin Delays algorithm, this parameter sets the panning of the right DL2/DL4 (and FB2/FB3) channel between right and left, before the final filter s...
KNOW MORE
Shape and Spread (SHAPE)
Shape – SHP
Range: 0 to 255 Description: The two parameters Shape and Spread work together to control the contour of the initial envelope of the reverberation sound. Shape controls the actual amplitude contour...
KNOW MORE
Shape and Spread (SHAPE)
Spread – SPR
Range: 0 to 255 Description: The Spread parameter controls the time stretch of the initial decay phase. It works in combination with the Shape and Decay Optimization parameters to form the overall ...
KNOW MORE
Shape and Spread (SHAPE)
Size – SIZ
Range: 1m to 39m (depending on the algorithm) Description: Sets the apparent size (roughly equal to the longest dimension in meters) and how fast the diffusion builds up. It also affects the Reverb...
KNOW MORE
Shape and Spread (SHAPE)
Pre-delay – PDL
Range: 0ms to 1500ms Description: Adjust the time delay between the reverberation and the input signal. Contrary to popular beliefs, it’s not recommended to use the Pre-delay parameter for emulatin...
KNOW MORE
Shape and Spread (SHAPE)
Width – WID
Range: –360 to 360 Description: Controls the width of both the reverberation and pre-echoes. The parameter is able to perform phase inversion, Left/Right inversion (channel swapping) and surround–c...
KNOW MORE
Time (TIME)
Reverb Tail Level – RTL
Range: 0 to 127 Description: The Ambience algorithm parameter controls the level of the reverberant part of the decay. This parameter is unique to the Ambience algorithm. You can almost think of th...
KNOW MORE
Time (TIME)
Delay Multiplier – MST
Range: 0.50x to 2.00x Description: Specific to the Twin Delays algorithm, this parameter is a master multiplier that allows you to adjust the delay times for all four delay lines (DL1, DL2, DL3 and...
KNOW MORE
Time (TIME)
Left Delay Roll-Off Freq – ROL
Range: 120Hz to Full Description: Specific to the Twin Delays algorithm, this parameter controls the roll-off frequency for the low pass filter on delay line 1 (left channel). Note: This is a conti...
KNOW MORE
Time (TIME)
Left Delay Rolloff Shelf – RSL
Range: Cut to 0db Description: Specific to the Twin Delays algorithm, this parameter controls the amount of reduction above the roll-off frequency (ROL) for the low pass filter on delay line 1 (lef...
KNOW MORE
SHOW MORE

STAY CONNECTED

SUBSCRIBE FOR OUR NEWSLETTER

Get the latest Relab news, product info, and great deals and personal service.

Facebook-f Youtube Soundcloud

Don't worry, we're not going to send you spam. Only the most necessary and important news awaits you.

© Relab 2024. All rights reserved